Contents
What is a natural gas earthquake valve?Earthquake valves are valves that detect seismic movements and cut off the natural gas flow. It is attached to the natural gas main entrance lines at the entrance of the buildings. The factor that makes the use of Earthquake Valves important; It is to minimize the damages that may be caused by the fire disaster that may exist together with the earthquake disaster.
How does the seismic earthquake sensor work?The sensor (Gas shut-off device) detects the earthquake motion in the earthquake shaking at the acceleration values specified in the TSE Standard and automatically cuts the natural gas by sending a signal to the gas shut-off safety valves (Solenoid Valve) mounted on the column lines of the buildings where natural gas is used.
How much is the natural gas earthquake valve?
DIAMETER DN FRS PRICE TL 1” 25 140 TL 11/4” 32 140 TL 11/2” 40 140 TL 2” 50 140 TL What is an earthquake pin?The gas shut-off device detects the earthquake motion in the earthquake shaking at the acceleration values specified in the TSE Standard and automatically cuts the natural gas by sending a signal to the gas shut-off safety valves (Solenoid Valve) mounted on the column lines of the buildings where natural gas is used.
Mechanical earthquake valve. How does it work?Mechanical earthquake valves generally activate in earthquakes with an intensity of 5.4 and above, cut the gas 100% safely and provide full sealing. Thanks to the ball in the valve, it closes the gas line due to the shaking in severe earthquakes and does not allow gas passage until it is re-installed. It detects the earthquake movement in the tremors at the acceleration values specified in the TSE Standard and automatically cuts the natural gas by sending a signal to the gas shut-off safety valves (Solenoid Valve) mounted on the column lines of the buildings where natural gas is used.
What are the types of earthquake sensors?Earthquake Sensor Types
Seismic Relay Control Panel Types. Electromechanical Earthquake Sensor Models. Types of Electromechanical Earthquake Sensor Nofire. What does Eska Valve do?ESKA ERG-E series single stage gas pressure regulators are used in gas lines to reduce the maximum 0.5 bar inlet pressure to the desired outlet pressure between 16 and 150 mbar. Output pressure range can be adjusted with different spring selection.
What is an earthquake sensor?
What is a solenoid valve and what does it do?Solenoid valve; water, air, oil etc. It is the name given to electromagnetic valves used to control fluids. In order for the piston in the valve to move, electrical power is given to the coil.
What does seismic movements mean?The fluctuations created by the earth's crust during sudden energy discharge are called seismic waves. A large amount of energy is released during an earthquake or explosion in the ground. Seismic waves propagate in many different directions in the ground environment.
What is Seismic SiscuT?
What does it do? Seismic SiscuT, produced in accordance with TSE TS 12884 standard; It automatically cuts off the natural gas by sending a 12V signal in the first wave of the earthquake to the gas shut-off valves (solenoid valves) on the natural gas main inlet pipe of the building.
Read: 192
