How to read resistance with trending Color codes?
How to read the resistor with color codes?
If it should be given as an example: The colors on the 5-color resistor are yellow, blue, black, orange and brown, respectively. That is, the circuit resistance of 460 × 1000 = 460000 Ohm, that is, a resistance of 460 k Ohm, is a resistance and the tolerance value is approximately +/-1%.
How to calculate color codes?< /p>
If we calculate the resistance value, the values of the first two colors are written side by side and then multiplied by the multiplier value. Five band color coded resistors are high precision resistors. The first three colors of the five band resistors from the left indicate the numerical value, the fourth color indicates the multiplier and the last color indicates the tolerance.
What are the resistor color codes?
Resistance color codes; It consists of black, brown, orange, yellow, green, blue, purple, gray, white, gold and silver colors. Resistor color codes are displayed on systems consisting of 3, 4, 5 and 6 bands. Resistor color codes are determined according to the internationally accepted IEC 60062 standard.
Which number corresponds to green in resistor color codes?
Table 1-Colors If we write the numbers of the first two bands side by side, we get 2 digits. we get a number. For example, the first two bands for the above resistance are brown and green, respectively. Since brown equals the number 1 and green equals the number 5, when we put these numbers together we get the number 15.
How to color coding?
RGB in color coding; If Red (red) is 255, Green (green) is 0, and Blue (blue) is 0, the resulting color is red. In RGB color coding, it is shown as red: RGB (255,0,0). In RGB color coding, it is shown as green: RGB (0,255,0).
Is there a direction of resistance?
Resistance has no direction. When the legs of the resistor are swapped in a circuit, there is no change in current or voltage values. The resistor is indicated by one of the following symbols in the circuit diagrams. Usually, the value (such as 100Ω) is indicated next to or above this symbol.
What are the 330 ohm resistor colors?
Orange – Orange – Brown – Gold.
How do we know how many k the resistor is?
The numbers corresponding to these colors are put side by side and multiplied by the multiplier color to find the value of the resistor. Since brown is 1 and black is 0, the number value is 10, and the multiplier is 100, since the 3rd color is red. In this case, the value of the resistor is 10 x 100 = 1000 Ohms, ie 1 Kohm.
Read: 192
